Rotgeheim-class aircraft carrier

Class overview
Name	Rotgeheim
Namesake	Rotgeheim
Builder	Rotgeheime Werke
Operators	Rotgeheim Northern Prussia
Cost	$300 million per ship
In commission	1905 - present
Planned	5
Completed	5
Currently under construction	0
General characteristics
Type	Aircraft carrier
Displacement	115,000 tons
Length	1,150 ft (350.2 m)
Beam	315 ft (96 m)
Height	280 ft (85.34 m)
Installed power	Three A1B nuclear reactors
Propulsion	Four shafts
Speed	30 knots (56 km/h; 35 mph)
Range	Unlimited distance; 30 years
Complement	5,270
Aircraft carried	More than 100
Aviation facilities	1,092 ft x 256 ft (333 m x 78 m) flight deck

The Rotgeheim class are one of the few classes of aircraft carrier utilized by the Navy of Rotgeheim. An order for four was issued in 1904, with the lead ship of its class produced in 1905 and the other three finished by 1908. The class itself is named after the country of origin as a testament to its self-given aura of success and respect. The class is known for being large, as the only ships larger than these in the arsenal of Rotgeheim are the Hornung-class battleships in service. These gargantuan vessels are usually present in all conflicts involving Rotgeheim, as their large complement of aircraft is invaluable to winning an engagement. After the successes of the Rotgeheim-class aircraft carriers during the 10 Days War, Northern Prussia (an ally of Rotgeheim) purchased a single aircraft carrier.

Background

The building of the Navy in the late 1890s and 1900s saw the creation of a multitude of warfaring vessels. As the Navy of Rotgeheim grew more powerful, the Navy Chiefs of Staff looked toward expanding even more upon its strength. The Hornung-class battleships are one such example of the expansion. In June 1904, Kaiser Florian I issued an order of four large aircraft carriers to one of the most renown shipbuilders in Rotgeheim and internationally, Rotgeheime Werke. The first drafts and concept designs for the aircraft carrier class were produced in August of 1904. The Kaiser appreciated the designs given and gave the go-ahead to begin production later that month.

Design

Flight Deck

When drawing up the designs for the Rotgeheim-class, particular attention was paid towards the flight deck. Several nations in other conflicts had won decisive engagements with aircraft carriers, and many of the ships utilized were equipped with large flight decks. More takeoff space was envisioned, along with specializes support structures to allow heavier aircraft to take off. The accepted design for the flight deck was a total length of 1,092 feet by 256 feet.

Hangar Deck

As with the flight deck, the hangar deck was designed with more space in mind. The heavier aircraft of modern times required ample space for loading and storage. The designers of the Rotgeheim-class created specialized support structures both for the flight deck and hangar deck to allow for heavier aircraft to be stored, loaded, and finally take off. Not only were the supporting structures to the hangar and flight decks required to carry the increased weight of landing and parked aircraft, but they were to have sufficient strength to support the storing of spare fuselages and parts (50% of each plane type aboard) under the flight deck and still provide adequate working space for the men using the area below.

Ships

The following ships are the produced and actively-serving Hornung-class battleships. Production numbers are assigned by the manufacturers to denote the location in which it was produced, as well as denoting which number ship it is in the production line. Hull numbers are the letter and number designation given to each ship, apart from its actual ceremonial name. Aircraft carriers in the Rotgeheiman Navy begin their hull number designations with "FT", representing Flugzeugträger ("Aircraft Carrier"). Ships in the Navy of Northern Prussia, unlike their Rotgeheiman counterparts, do not have hull numbers, and as such they are not listed.